Coffee Table – part 2
This is part 2 of the coffee table project class that I am taking at the Philadelphia Furniture Workshop school.
Now that the table top was assembled, it was time to work on the legs. I found a piece of walnut with similar color and grain as the table top. I used a template to layout the legs, aligning the wood grain to the direction of the grain.
I used the band saw to cut out the legs.
Then I cut out the mortises on the legs.
The matching tenons were cut with a band saw. A rasp was used to round the corners to fit.
The legs were then glued and clamped to the stretcher.
While the legs were drying, I rounded the edges of the table top at the router table.
